PlayGoodGolf.com
Learn › Golf balls › Construction

Dimples and Aerodynamics: Why a Smooth Ball Flies Half as Far

Those little dents aren't decoration. They roughly double how far your ball carries.

All levels · 3 min read

Quick take

  • Dimples trip the air into a turbulent layer.
  • That cuts drag dramatically.
  • Backspin plus dimples creates lift.
  • A smooth ball would carry roughly half as far.

The smooth-ball problem

Golfers in the 1800s noticed that beat-up balls flew farther than new, smooth ones. They were right. A perfectly smooth golf ball, hit with a driver, would typically carry only about half as far as a dimpled one.

How dimples cut drag

Air flowing around a smooth ball separates early from the surface. That leaves a big, low-pressure wake behind it, like an anchor pulling backward.

Dimples create a thin layer of turbulent air that hugs the ball longer before letting go. The wake shrinks. Drag drops a lot.

How dimples create lift

Backspin makes air move faster over the top of the ball than underneath. That pressure difference pushes the ball up. This is the Magnus effect. Dimples make it far more effective.

Why dimple patterns differ

  • Most balls have roughly 300 to 400 dimples.
  • Shape, depth and pattern tune launch and how the ball holds its line.
  • Shallow dimples tend to fly higher; deeper ones tend to fly lower (as a general tendency).
  • Manufacturers test patterns in wind tunnels and with robots.

Typical driver carry

Illustrative numbers for a fast amateur swing. The point is the ratio, not the exact yards.

Did you know? The Rules set symmetry requirements, so a conforming ball must fly the same however it's oriented on the tee.

A quick history

Early balls were smooth. Players noticed that nicked, scarred balls flew better, so makers began adding raised and hammered patterns. In the early 1900s dimpled designs appeared and soon became the standard. The idea hasn't changed much since. The refinements have.

What damaged dimples do

A deep scuff or cut disrupts airflow on one side of the ball. That can make it fly unpredictably, especially into the wind. A light scuff rarely matters. If you can feel raised cover material with a fingertip, retire that ball.

What this means for you

  • You don't need to study dimple patterns to choose a ball.
  • Keep the cover clean. Mud on the ball changes flight too.
  • Every conforming ball has been tested to fly consistently.
Skip for now: Choosing a ball by dimple count. It's a marketing number. Spin and cover tell you far more.
Try it in the Ball Flight Lab
Put it to work

Gear that fits this advice

See all matches →
Tour urethaneNew & used
Titleist · 2025

Pro V1

The benchmark tour ball: penetrating flight, superb greenside spin.

  • Fits your skill level
  • Strong on longest
Forgive
Distance
Spin
$55approx. per dozen new · used from $20
Soft tour urethaneNew & used
Titleist

AVX

Softest Titleist urethane ball with a lower, longer flight.

  • Fits your skill level
  • Strong on longest
Forgive
Distance
Spin
$55approx. per dozen new · used from $18

Keep learning